Table of Contents
Nvidia Geforce RTX 3090 Ti desktop GPU, which was released in 2022. The GPU is based on Ampere architecture. It is manufactured using an 8 nm technological process. The Nvidia Geforce RTX 3090 Ti graphics card runs at 1670 MHz, and can be boosted to 1860 MHz Nvidia Geforce RTX 3090 Ti has 10752 CUDA cores, 96 ROPs, and 272 texture units. The Nvidia Geforce RTX 3090 Ti has 24 GB of GDDR6X memory. And clocked at 1219 MHz it has a 384-Bit wide memory Bandwidth, which gives 936.19 GB/s memory bandwidth. The GPU has PCI Express 4.0 interface. Nvidia Geforce RTX 3090 Ti requires 2 motherboard slots. Nvidia Geforce RTX 3090 Ti has a maximum power draw of 350 watts.
*Please Note: These are affiliate links. I may make a commission if you buy the components through these links. I would appreciate your support in this way!
Nvidia Geforce RTX 3090 Ti
Name and Architecture:
|GeForce RTX 3090 Ti
|PCI-E 4.0 x 16
|Price at launch:
Nvidia Geforce RTX is the best GPU from Nvidia. It has one of the fastest rams with amazing speeds of memories. This GPU was launched back in 2020 but still, it has its hype. This is one of the most famous GPU in the market right now. What makes this GPU so special is its performance and its price. This GPU architecture is Ampere and fabricated using 8NM technology. This GPU is also GEN 4 which means every motherboard that supports GEN 4 PCIe can get better performance with the GPU. This GPU has more transistors than the Nvidia Geforce RTX 3060 which is a little low in performance compared to this GPU. Nvidia Geforce RTX 3090 Ti has 28 billion transistors in it which means the parallel process will be faster. This GPU is considered to be a magical GPU because it has everything that a good gamer and editor needs. Let’s talk about that in detail. The most important thing is the price of the GPUs. We know that in 2020-2021 due to Covid there was a huge shortage of Silicon, and everything related to tech was short.
The base frequency of this GPU is 1670 MHz, which is faster than most new GPUs. The Boost Clock is also faster than other GPUs at this point which is 1860 MHz the base frequency is going to help in mostly GPU-bound games like Call of Duty Warzone. The boost clock is also helping in demanding games like Cyberpunk 2077, Assassin’s Creed, God of war, and the newly launched Eden Ring. The more the frequency is the faster the speed of the GPU will be.
|Memory clock (effective):
|Memory interface width:
Nvidia Geforce RTX 3090 Ti has 24 GB of GDDR6X memory with a frequency of 1313 MHz. Which is really fast compared to its predecessors. The memory clock of this GPU is 21GHz, which is amazingly fast, and don’t forget this GPU is also power full. This GPU interface is 384-Bit which faster beast GPU than Nvidia Geforce RTX 3060 is. The memory bandwidth is a lot faster than its predecessor also. Like it’s faster than Nvidia Geforce RTX 2060 and Nvidia Geforce RTX 2070. The memory bandwidth is freaking 1008 GB/s which is awesome. The cache memories are also good in terms of performance. The L2 cache memory is 6MB which is impressive. The memory clock of this Nvidia Geforce RTX 3090 Ti is 21GHz which will help in boosting game performance.
Cores & Texture:
|Texture Mapping Units
|Render Output Units
Nvidia Geforce RTX 3090 Ti has so many Cuda cores like so many. There are so many Cuda cores on a larger scale, which are 10752 Cuda cores. The Cuda cores are more than Nvidia Geforce RTX 2060 and Nvidia Geforce RTX 2070. There are 82 RT cores that help in rotating, resizing, and scaling the image. There are also 336 tensor cores, which will help in Ray tracing. Ray tracing is so much fun to play with I mean with the new latest games you can enjoy the full amazing lighting control, reflections, and so much more to play games with ray tracing on. There are also new features in this GPU like DLSS, what these features do is that new algorithms this upscale your game’s resolutions to make it more crisp and sharp. There are also 112 Rops that help in rotating, resizing, and much more. The Texture units help a lot when it comes to gaming textures like cars, bushes, trees, etc. with new continuous updates in drivers this GPU gets faster and more efficient in updates from Nvidia. This GPU also features more amazing things with compatible CPUs like Intel Core i9 12900KS, AMD Ryzen 7 5800, AMD Ryzen 9 5900, and AMD Ryzen 5 5600. With these new processors, this GPU can provide a significant boost in performance. It can double its FPS count in frames with these new CPUs. You can find complete articles just by clicking these processors’ names. There are also 336 Texture units which will help in boosting the performance of the Texture fill rate in the games.
|Maximum power draw:
This GPU’s maximum power consumption is 320W compared to its predecessor’s 400W. This GPU is faster than the Nvidia Geforce RTX 3070. This allows the users to get more out of the GPU. There are also many variants of this GPU that can be further overclocked thus eating more power. The power limit of this GPU is around 390W which is a lot to get faster performance when it’s overclocked. You can get 10-15% more FPS when it’s overclocked but I would not recommend that if you don’t know about overclocking. The amount of power it eats when you gaming on it is around 320W which also leads us to better heat management. This GPU is fabricated using 8NM which also is power efficient. There are more variants of this GPU but I personally like the Asus Rog Strix version of this GPU, because it has 3 fans with a good radiator and with a good cooling system. One more big advantage of this 8NM fabricator is that the heat management is very good, also with new curve fans to get a high amount of RPM.
|Up to 4 displays
|Maximum digital resolution:
|7680 x 4320 @60 Hz
|Maximum DP resolution:
|7680 x 4320 @120 Hz
|Maximum HDMI resolution:
|4096 x 2160 @ 60 Hz
The max monitor support increases with the increase of new technologies and with new updates from monitors, TVs, etc. the GPU’s updates as well. This GPU can support maximum display at 8K with up to 4 monitors. There are vainest with different display outputs. But you will find more than 4 display connectors. There are some variants with thunderbolt displays at well. But there will be 2 display ports 1.4 and 2 HDMI 2.1 connectors. The display port can support 8K at 120Hz which is amazing. Because there will be no lags, no delays with this new DP version. There is no 8K support on HDMI. Well, because the bandwidth of the HDMI is far less than the bandwidth of DP. If you have a monitor that supports 4k 144Hz or a monitor that supports 240Hz then I will recommend using the DP. Because of its bandwidth.
|Pixel fill rate:
|Texture fill rate:
|Single precision computes power:
|Double precision computes power:
We calculate and measure the performance of the GPUs in pixel fill rate, texture fill rate, single-precision computation power, and double-precision compute power. The single-precision compute power, and double-precision compute power is similar that, how we check the performance of a CPU like Geekbench 5 and furmark. Now let’s talk about what is actually all of this. To understand that we need to start with the pixel fill rate. Pixel fill rate is known as the number of pixels that a video card can write to memory and can render every second. This pixel fill rate is measured in Gigapixels and in megapixels which means GT/s and MB/s. this measure the clock frequency of the GPU and the number of ROPs (raster operations). This means the GPU with a high pixel fill rate will support display at high resolutions with high frame rates compare to other GPUs that have a low pixel fill rate. This pixel fill rate fills all the pixels in the monitor, or TV that you are using. The more the pixel fill rate the faster the performance of the GPU will be. The pixel fill rate of This GPU has scored 208.3 Gigapixels/s which is amazingly fast compared to its predecessors. The texture fill rate also scores 625 Gigatexels/s. That’s why it supports 8K at high frame rates thanks to ROP’s. Now let’s talk about the texture fill rate. Texture fillrate measure how many texels can a GPU render per second. Texture fill rate is always measured in the amount of me like (1s). Texels are basically three-dimensional space objects and are called textured pixels.
|Standard display connectors:
|3 x DisplayPort 1.4a
|1x 16-pin or 3x 8-pin
|Audio input for HDMI:
Well, one of the most important and key factors about this GPU is its power consumption. This GPU is not that power-hungry. This GPU needs a 1x 16-pin or 3x 8-pin connector. There are also 3 display ports and 1 HDMI port, which is really great for multiple monitors. There is also Audio input from HDMI which also helps with these new monitors. The 1x 16-pin or 3x 8-pin really made the wiring system completely awesome.
|13.8 cm or 5.4 inches
|31.3 cm or 12.3 inches
These days the size of the GPU is also important because there are a lot of cases that don’t fit some long GPUs. This GPU is 12.3 inches, which can fit in most PC cases. Plus the GPU is also triple-slot which helps in heat overflow. There are some variants of this GPU who’s offering single-slot GPU with a small form factor. Off course, there will be some major issues with heat management in these small GPUs. I will always recommend the normal version of the GPU because in summer the heat dissipation will help in those high variants. The higher variants are more optimized than the normal ones, thus they can handle heat better.
Features & Support:
3D Vision Surround
|Open CL support:
There are a lot of new features in this GPU, and they are updated over me. The most amazing new features of this GPU are Ray tracing, 3D Vision, PhysX, etc. this GPU is so rich in features that a GPU king like Geforce RTX 3060 left behind. This Nvidia Geforce RTX 3090 Ti has Open CL support 2.0 which is a lot more efficient than the last gen Open CL 1.0. This will help in boost in performance. Nvidia Geforce RTX 3090 Ti also has Open GL 4.6 support which is also faster than the Open GL 4.5. Nvidia Geforce RTX 3090 Ti also has DirectX 12 ultimate support. The Vulkan support is also 1.2 which makes the drivers experience more up-to-date. The Shader model makes the texture experience more accurate and more efficient and fast. Nvidia Geforce RTX 3090 Ti has the Shader model 6.5.
The gaming experience of this GPU is on another level. Nvidia Geforce RTX 3090 Ti has the fastest memories, fast clock speeds, faster memory clock speeds, more Cuda cores, the newest architecture, and higher bandwidth. Which makes the gaming experience more powerful. The more the Cuda cores the faster the performance of a GPU will be. So this GPU is like steroids when it comes to the Cuda cores. Running GTA 5 on this GPU will give you around 120+ FPS. And in almost every game this GPU shows the best performance.
So, this was my full review of the Nvidia Geforce RTX 3090 Ti if you want to check out more articles like this then check the reviews in the menu. Also, do check out my YouTube channel. Thanks.
My YouTube channel Link: